China-based hardware sourcing · For trade buyersTalk to Zihao: +86 156 3093 3906
HARDWARE BUYING GUIDE

Bracket drawing checklist for supplier quotations

A useful quotation drawing shows what must be supplied and what must fit. Organise the drawing, reference photos and questions so that each supplier reviews the same bracket and the same revision.

Identify the drawing and the file set

Put the part reference, drawing number, revision and measurement units on the drawing. Use the same references in the enquiry line and file names. Where an assembly contains several brackets, give each distinct part its own reference.

Include a readable drawing with the views needed to describe the part. If you also send a CAD model or a marked-up image, state how those files relate to the drawing. Tell the supplier which document should control if two files disagree, and resolve the conflict before approving the quotation.

Describe the finished shape

Check that the drawing describes the finished component, not just its appearance in a photo. Dimensions and tolerances must come from your design or the responsible designer; this guide does not supply default values.

Information to make visible in the drawing
Part typeDetails to identify
Angle bracketBoth legs, width, thickness, required angle, and any controlled bend or corner details.
U bracketInside opening, leg heights, base dimensions and the clearances that must fit the mating component.
Joining plateOutside dimensions, thickness, holes or slots and any controlled surface or edge requirements.

For a replacement part, mark the features that must match the existing assembly. If a dimension is not known, identify it as a question instead of estimating it from the picture.

Make hole and slot references unambiguous

For each hole or slot, show its size, position and orientation as required by the drawing. Identify the edge, centreline or other reference used for the position. Distinguish the distance between hole centres from the distance measured to an edge.

If several views show the same feature, make sure their references agree. Include the required tolerances and flag any hole pattern that must align with an existing part. A photograph with a ruler can support identification, but it should not silently replace the approved dimensions.

Show how the bracket relates to the assembly

Add the mating-part reference and the relevant assembly view when fit depends on another component. Identify required access or clearance without assuming the supplier can infer it from the bracket alone.

List bolts, screws, nuts and washers separately from the bracket, or define the contents of a complete set. For screws, the self-tapping and self-drilling enquiry guide explains which connection details to include.

A drawing for quotation is not by itself proof of structural suitability. Where the bracket has a structural role, include the project requirements and obtain the required engineering review. This page does not assign a load capacity.

State the material, finish and document requirements

Give the material and finish you require, using the specification or drawing reference available to you. Mark surfaces or features with particular requirements and identify any documentation that the order needs.

Keep appearance references separate from material evidence. A photo can communicate the desired visual result, but it does not establish the material, coating specification or certification of a proposed part. If a sample is to be reviewed, agree what that sample review must establish and keep the approved reference identifiable.

Close the revision loop before ordering

  1. Ask the supplier to quote against the named drawing and revision.
  2. Collect open questions and proposed changes against the same part reference.
  3. Have the responsible person resolve the changes and issue the revised requirements.
  4. Obtain a quotation that identifies the final revision and any agreed exceptions.
  5. Carry those references into the order, inspection requirements and packing labels.

Use the quotation comparison checklist when supplier replies cover different revisions or scopes. Send your part name, drawing, quantity, intended application and destination when requesting a BOLTPV quotation.