Start with the hole-making difference
For the lightweight construction fasteners covered by EJOT’s guide, self-tapping screws without a drill point use a hole prepared beforehand, while conventional self-drilling screws combine a drilling point with thread formation and fastening. This is a useful starting distinction for a metal-fastening enquiry. See EJOT’s screw-type guide.
Product terminology and designs can vary. Ask for the exact proposed screw reference and installation information. A general comparison does not establish whether a particular screw suits your connection.
Compare the enquiry requirements
| Question | Self-tapping screw without a drill point | Self-drilling screw |
|---|---|---|
| Hole preparation | Confirm the required pre-hole and the product instructions. | Confirm the product’s stated drilling application and installation instructions. |
| Point identification | Provide the specified point style or a clear reference photo. | Identify the proposed drill-point design or exact model. |
| Material information | State each material layer and the supporting material. | State each material layer and the supporting material; request product data for that build-up. |
| Head and drive | Identify both the head shape and the drive requirement. | Identify both the head shape and the drive requirement. |
| Washer or seal | State what is required and whether it must be supplied assembled. | State what is required and whether it must be supplied assembled. |
Use these questions to organise an enquiry, not to assign a drilling capacity, installation torque or load rating. Those values must come from the exact proposed product and the applicable project requirements.
Send the material layers and connection detail
List the materials in the order they are joined and state the thickness of each layer. Identify the supporting material separately from the sheet or component being fixed. Include an assembly sketch or the relevant project detail when a gap, insulation or another layer forms part of the connection.
Describe the application and service environment. If a hole already exists, record that fact and provide its specified dimensions. If you are uncertain about the hole preparation, leave it as an explicit question for review rather than selecting a screw from a similar-looking photograph.
Use a sample or photo without overclaiming
For a replacement enquiry, photograph the head, drive, point and side profile. Add measured dimensions, any visible markings and the quantity required. Identify dimensions that must match an existing part and distinguish measurements from assumptions.
A sample can help start identification, but appearance alone does not confirm the material, finish or performance. Ask the supplier to state the proposed specification and any differences from the reference. The quotation comparison checklist helps record those differences before an order.
Keep the screw and accessories on the same request
Specify the required washer or sealing element, its reference if known, and whether it must be preassembled. State the required head appearance or drive separately; do not infer a complete screw-and-washer combination from a general product name.
For a bracket assembly, link the screw line to the relevant bracket drawing and revision. List the quantity of each component, the unit used, packing requirements and destination. Use the general enquiry checklist for the remainder of the parts list.
Review an alternative before accepting it
If a supplier offers a different screw, request the exact item reference, the stated differences and the product information needed for your application. Compare the material build-up, point, dimensions, head, drive and washer arrangement against your requirement.
Obtain any project approval required before substitution. BOLTPV’s catalogue images and family names do not certify a proposed screw or establish an installation value. For a quotation, send the product name, specification, quantity and application with your drawing or photos.
The EJOT reference supports the general screw-type distinction in its lightweight construction context. It is not evidence of BOLTPV product specifications, certification, brand affiliation or performance.